Operating Tips:
| Specification | CL-410/CL-410V | CL-460/CL-460V | ||||
| Capacity | ||||||
| Swing over bed | 410mm(16") | 460mm(18") | ||||
| Swing over cross slide | 220mm(8-13/16") | 270mm(10-3/4") | ||||
| Swing in gap diameter | 640mm(25-1/8") | 690mm(27-1/8") | ||||
| Distance between centers | 1000mm(40") | 1500mm(60") | 2000mm(80") | 1000mm(40") | 1500mm(60") | 2000mm(80") |
| Valid length of gap | 165mm(6-1/2") | |||||
| Width of bed | 300mm(11-13/16") | |||||
| Headstock | ||||||
| Spindle nose | D1-6 | |||||
| Spindle bore | 58mm(2-1/4") | |||||
| Taper of spindle bore | No.6 Morse | |||||
| Range of spindle speed | 12 changes, 25～2000r/min (30-600/600-3000rpm) | |||||
| Feeds and threads | ||||||
| Max. travel of compound rest | 128mm(5") | |||||
| Max. travel of cross slide | 285mm(11-1/4") | |||||
| Max. section of tool | 25×25mm(1"×1") | |||||
| Pitch thread of leadscrew | 6mm or 4T.P.I. | |||||
| Longitudinal feeds range | 42 kinds, 0.031-1.7mm/rev(0.0011"-0.0633"/rev) | |||||
| Cross feeds range | 42 kinds, 0.014-0.784mm/rev(0.00033"-0.01837"/rev) | |||||
| Metric threads range | 41 kinds, 0.1-14mm | |||||
| Inch threads range | 60 kinds, 2-112T.P.I. | |||||
| Diametrical pitches range | 50 kinds, 4-112DP | |||||
| Module pitches range | 34 kinds, 0.1-7MP | |||||
| Tailstock | ||||||
| Dia. of tailstock sleeve | 60mm(2-5/16") | |||||
| Travel of tailstock sleeve | 128mm(5") | |||||
| Taper of tailstock sleeve | No.4 Morse | |||||
| Motor | ||||||
| Power of main motor | 5.5kw(7.5HP) 3PH | |||||
| Power of coolant pump | 0.1kw(1/8HP) 3PH | |||||
| Dimension and weight | ||||||
| Overall dimension (L×W×H) cm | 220×108×134 | 275×108×134 | 325×108×134 | 220×108×137 | 275×108×137 | 325×108×137 |
| Packing size(L×W×H) cm | 225×112×162 | 280×112×156 | 330×112×156 | 225×112×162 | 280×112×156 | 330×112×156 |
| Net weight | 1580kg | 1745kg | 1900kg | 1645kg | 1810kg | 1965kg |
| Gross weight | 1845kg | 2050kg | 2230kg | 1910kg | 2115kg | 2295kg |
Gear Head Precision Gap-bed Lathe (CL-410, CL-410V, CL-460, CL-460V)
Features:
- Triple bearings supporting headstock spindle.
- Adjustable taper roller bearings providing spindle accuracy.
- Precision 'V'-beds & headstock gears are all hardened & ground.
- One piece cast iron base increases rigidity.
- Overload protection on drive motor and coolant system.
- Universal enclosed gearbox incorporating metric & imperial thread capabilities.
- Inching button incorporated on the control panel for convenient spindle speed selection.
- Foot operated spindle brake with safety cut out switch.
- 300mm wide induction hardened heavy duty cast iron bed.
- Removable gap bed allowing work piece to swing up to 690mm.
- Chuck guard fitted with safety micro switch.
- Powered longitudinal and cross feeds.
- Adjustable 4 position length-stop mechanism for accurate repetitive operation.
- Micro adjustable saddle stop.
- Dual calibrated dials incorporating metric & imperial graduations.
- Coolant system with flexible hose enabling operator to manipulate flow direction.
- Oil sight glass for head stock and gearbox.
- Low voltage halogen work light.
- Lubrication pump on saddle oiling slides.
- D1-6 camlock spindle for quick chuck removal.
- 12 spindle speeds from 25-1600rpm .
- ForCL-410V/CL-460V, spindle speeds is stepless in two grades: 30-600/600-3000rpm.
- Large 58mm spindle bore, 80mm spindle bore is optional.
Standard Accessories:
3 jaw chuck, 4 jaw chuck, Face plate, Steady rest, Follow rest, Dead center, Oil gun, Coolant system, Working light, General tools, Foundation bolts, Operation manual (English edition)
Optional Accessories:
2, 3-axes DRO, Quick change tool post, Taper turning attachment, CE execution
