Operating Tips:
| Specification | T-1440B | T-1640B |
| Max swing over bed | 356mm | 400mm |
| Max swing over cross slide | 220mm | 264mm |
| Max swing over gap | 506mm | 550mm |
| Width of bed | 206mm | 206mm |
| Distance between center | 1000mm | |
| Taper of spindle hole | M.T.NO.5 | |
| Hole through spindle | 38mm or 52mm (optional) | |
| Step of spindle speed | 8 or 16 steps | |
| Range of spindle speeds | 90 or 45-1800 r.p.m | |
| Spindle nose | D1-4 | |
| Metric thread range | （37）0.4-7mm (22)0.45-7.5mm | |
| Whitworth threads range | (28)4-56T.P.I (40)4-112T.P.I | |
| Range of longitudinal feeds | (42)0.043-0.653mm/rev (40)0.0304-0.746mm/rev | |
| (42)0.0017-0.0257in/rev (40)0.0012-0.0294in/rev | ||
| Range of cross feeds | (42)0.015-0.22mm/rev (40)0.0076-0.254mm/rev | |
| (42)0.0006-0.0087in/rev (40)0.0003-0.0100in/rev | ||
| Pitch and diameter of leadscrew | 4mm 8 T.P.I | |
| Travel of carriage | 840mm | |
| Travel of cross slide | 178mm | |
| Travel of top slide | 92mm | |
| Travel of tailstock quill | 115mm | |
| Diameter of tailstock quill | 45mm 1-25/32〞 | |
| Taper of tailstock quill | M.T.NO.3 | |
| Motor power | 2/3.3HP | |
| Ner weight | 750KG | |
| Packing size | 1950×760×1480mm | |
Engine Lathe (T-1440B, T-1640B)
Features:
Gear drive headstock for quick change of spindle speeds
Cast iron stand increasing rigidity and reducing vibration
Precision 'V'-beds are hardened and ground, incorporating a rigid webbed casting
Low voltage work light
Foot operated spindle brake with safety cut out switch
Slide out front swarf tray for easy cleaning
Change gears for metric and imperial thread cutting
Oil sight glass for head stock and gearbox
Adjustable taper roller bearings support the spindle
Overload clutch mechanism on auto power feed
Micro-adjustable length-stop on bed-way for accurate repetitive operation
16-speed (45-1800rpm)
Inching button is incorporated on the control panel for convenient spindle speed selection
Enclosed quick action gearbox for thread cutting and auto feeding
Powered longitudinal and cross feeds
D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
Removable gap bed-way for larger diameter jobs
Dual calibrated dials (except for saddle hand-wheel)
Chuck & change gear guards are fitted with micro switches
Coolant system with flexible hose
Slide out swarf tray
Standard Accessories:
3 jaw chuck, 4 jaw chuck, Face plate, Steady rest, Follow rest, Dead center, Oil gun, Coolant system, Working light, General tools, Foundation bolts, Operation manual (English edition)
Optional Accessories:
2, 3-axes DRO, Quick change tool post, Taper turning attachment, CE execution
