Specification | T-1330A T-1340A | T-1430A T-1440A | T-1640A |
Swing over bed | 330mm(13") | 360mm(14") | 400mm(15.7") |
Swing over cross slide | 198mm(7-25/32") | 212mm(8-1/6") | 252mm(9.9") |
Swing in gap diameter | 476mm(18-3/4") | 491mm(9-1/3") | 550mm(22") |
Swing in length of gap | 210mm(8-1/4") | ||
Center distance | 750mm(30"), 1000mm(40") | 1000mm(40") | |
Bed width | 187mm(7-3/8") | ||
Spindle bore | 38mm(1-1/2") or 51mm(2") | 51mm(2") | |
Spindle nose | D1-4 or A2-4 | ||
Taper in sleeve | NO.3 Morse | ||
Speeds number | 8 or 16(pole changeable motor) (optional) | ||
Speeds range | 70-2000r.p.m.or 35-2000r.p.m.(2 speed motor) | ||
Cross slide travel | 160mm(6-5/16") 118mm(4-5/16") | ||
Compound rest travel | 68mm(2-11/16") | ||
Lead screw thread | 8T.P.I. or 3mm pitch | ||
Feed rod diameter | 19mm(3/4") | ||
Cutting tool max section | 16mm×16mm(5/8"×5/8") | ||
Threads imperial pitches | 36 Nos.8-112 T.P.I. or (34 Nos.4-56T.P.I) | ||
Threads metric pitches | 28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) | ||
Longitudinal feeds imperial | 36 Nos.0.0019-0.0273"/Rev.or (32 Nos.0.002-0.548"/Rev) | ||
Longitudinal feeds metric | 36 Nos.0.050-0.696"/Rev.or (32 Nos.0.052-0.392mm/Rev) | ||
Cross feeds imperial | 36 Nos.0.0006-0.0094"/Rev.or (32 Nos.0.007-0.0187"/Rev) | ||
Cross feeds metric | 36 Nos.0.013-0.188"/Rev.or (32 Nos.0.014-0.380mm/Rev) | ||
Quill diameter | 32mm(1-1/4") | ||
Quill travel | 100mm(3-15/16") | ||
Quill taper | NO.3 morse | ||
For main motor | 1.5KW 3PH or 1PH |
Engine Lathe (T-1330A, T-1340A, T-1430A, T-1440A, T-1640A)
Features:
Gear drive headstock for quick change of spindle speeds
Precision 'V'-beds are hardened and ground, incorporating a rigid webbed casting
Low voltage work light
Foot operated spindle brake with safety cut out switch
Slide out front swarf tray for easy cleaning
Change gears for metric and imperial thread cutting
Oil sight glass for head stock and gearbox
Adjustable taper roller bearings support the spindle
Inching button is incorporated on the control panel for convenient spindle speed selection
Enclosed quick action gearbox for thread cutting and auto feeding
Powered longitudinal and cross feeds
D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
Removable gap bed-way for larger diameter jobs
Dual calibrated dials (except for saddle hand-wheel)
Chuck & change gear guards are fitted with micro switches
Coolant system with flexible hose
Slide out swarf tray
Standard Accessories:
3 jaw chuck, 4 jaw chuck, Face plate, Steady rest, Follow rest, Dead center, Oil gun, Coolant system, Working light, General tools, Foundation bolts, Operation manual (English edition)
Optional Accessories:
2, 3-axes DRO, Quick change tool post, Taper turning attachment, CE execution