Specifcation | Unit | AK-420 | AK-520 |
AK-420J | AK-520J | ||
AK-420P | AK-520P | ||
Swing over bed | mm | 420 | 520 |
Swing over carriage | mm | 210 | 320 |
Maximum length of workpiece | mm | 500/750/1000/1500/2000/3000 | 500/750/1000/1500/2000/3000 |
Maximum turning length | mm | 310/580/830/1330/1830/2830 | 310/580/830/1330/1830/2830 |
Span of guideway | mm | 400 | 400 |
Spindle nose | A26 | A28 | |
Chuck(Manual) | mm | Ф 200(standard configuration) | Ф 250(standard configuration) |
Chuck(Hydraulic) | mm | Ф 200(8") | Ф 250(10") |
Chuck(Pneumatic) | mm | Ф 200 | Ф 250 |
Spindle bore | mm | 58 | 80 |
Taper hole of spindle | 1:20/63 | 1:20/80 | |
Spindle speed and range | rpm |
AK-420: auto 4 gear steps, stepless speed change instep 27.5-2200 |
AK-520: auto 4 gear steps, stepless speed change in step 25-2000 |
rpm | AK-420J: 12 gear speed, 35-1600 | AK-520J: 12 gear speed, 35-1600 | |
rpm |
AK-420P: 4 gear steps, stepless speed change in step 14-1600 |
AK-520P: 4 gear steps, stepless speed change in step 14-1600 |
|
Center height from bed | mm | 225 | 270 |
Min.feed increment of X-/Z-axis | mm | 0.001/0.001 | 0.001/0.001 |
Rapid speeds of X-/Z-axis | mm/min | 4000/6000 | 4000/6000 |
Max.travel of x-axis | mm | 300 | 300 |
Tool-post working position | Vertical 4-position electrical turre | Vertical 4-position electrical turre | |
Indexing time | s | 2.4(V4) 2.2(V6) 1.6(H6) | 2.4(V4) 2.2(V6) 1.6(H6) |
Indexing repeatility | "mm | 0.008 | 0.008 |
Section of tool shank | mm | □25 | □25 |
Diameter of tailstock quill | mm | 85 | 85 |
Travel of tailstock quill | mm | 150 | 150 |
Taper hole of tailstock quill | Morse 5 | Morse 5 | |
Workpiece accuracy | IT6-IT7 | IT6-IT7 | |
Surface roughness | Ra1.6 | Ra1.6 | |
Main motor power | kw | 7.5 | 7.5 |
Machine weight | kg | 2600/2900/3200/3600/4000/5200 | 2600/2900/3200/3600/4000/5200 |
Length | mm | 2630/2740/2990/3560/4040/5040 | 2630/2740/2990/3560/4040/5040 |
Width | mm | 1500 | 1500 |
Height | mm | 1810 | 1810 |
Flat-bed CNC Lathe (AK-420, AK-520)
Features:
1. These series are economical and practical CNC lathes. With optimized structures,
unfailing performance, high quality, simple programming, and easy handling, they are
suitable for turning of complicated shaft, sleeve, and disk type workpieces such as
turning of internal and external cylindrical, conical, arc surfaces and various threads,
and even drilling, boring and reaming holes. And they are especially fit for turning of
diversified workpieces on small and medium batches.
2. They are of high versatility, high efficiency, low inferiority and good conformability.
So to be widely used in various trades, such as automobile industry, petroleum industry, military industry, and so on.
3. AK series accomplish stepless spindle speed changing by means of main motor frequency conversion and 4 shift hydraulic gear change.
4. AK…J series obtain 12 speeds all manually.
5. AK…P series spindle speed changing introduces main motor frequency conversion and 4 shift manual gear change.
Standard:
FANUC 0i mate TD controller, FANUC servo feed motor, inverter main motor, NSK bearings, 3 jaw chuck, 4 station electric tool post, manual tailstock, auto. lubricating unit, cooling system, lighting unit, general tools, operation manual(English edition)
Optional:
Other brand CNC controllers, 6 station electric tool post, gang type tool post, hydraulic solid chuck, hydraulic hollow chuck, Hydraulic tailstock