Operating Tips:
| Specification | W24-16 | W24-30 | W24-45 | W24-75 | W24-100 | W24-140 | |
| Max.Bending Resistant Modulus (cm3) | 16 | 30 | 45 | 75 | 100 | 140 | |
| Coiling Speed (m/min) | 5 | 5 | 5 | 5 | 5 | 5 | |
| Yielding Limit of Sheet Metal (Mpa) | 250 | ||||||
 |
Max.Cross-section (mm) | 70*8 | 80*8 | 90*10 | 100*10 | 120*12 | 140*16 |
| Min.Diameter of Bending (mm) | 1000 | 1200 | 2000 | 3000 | 4000 | 5000 | |
 |
Max.Cross-section (mm) | 80*8 | 900*10 | 100*10 | 120*12 | 140*16 | 150*16 |
| Min.Diameter of Bending (mm) | 1000 | 1100 | 1300 | 1600 | 1800 | 2200 | |
 |
Max.Cross-section (mm) | 12 | 16 | 20 | 25 | 28 | 30 |
| Min.Diameter of Bending (mm) | 800 | 800 | 1000 | 1100 | 1700 | 1200 | |
 |
Max.Cross-section (mm) | 12 | 16 | 20 | 25 | 28 | 30 |
| Min.Diameter of Bending (mm) | 900 | 1000 | 1150 | 1600 | 1700 | 1700 | |
 |
Max.Cross-section (mm) | 75*16 | 90*20 | 100*25 | 110*40 | 120*40 | 150*40 |
| Min.Diameter of Bending (mm) | 760 | 800 | 1000 | 1100 | 1300 | 1500 | |
 |
Max.Cross-section (mm) | 52 | 62 | 75 | 85 | 90 | 100 |
| Min.Diameter of Bending (mm) | 600 | 600 | 800 | 1000 | 1100 | 1200 | |
 |
Max.Cross-section (mm) | 76*4.5 | 89*5 | 89*8 | 114*5 | 159*5 | 168*6 |
| Min.Diameter of Bending (mm) | 750 | 900 | 900 | 1200 | 2000 | 2000 | |
 |
Max.Cross-section (mm) | 60*4 | 70*4 | 80*6 | 90*8 | 100*10 | 125*10 |
| Min.Diameter of Bending (mm) | 900 | 1000 | 1200 | 1600 | 2000 | 2500 | |
 |
Max.Cross-section (mm) | - | - | - | 10 | 12 | 14 |
| Min.Radius of Bending (mm) | - | - | - | 2000 | 2500 | 3000 | |
Hydraulic Section Bending Machine
Features:
Prile bending machine (Section bending machine) is a kind of high efficiency processing equipment which is specially used to bending various kinds of profiled steel such as angle steel, channel steel, I-steel, flat steel,square steel and round steel. It can one time finish the procedure of round rolling and round correcting. It is widely used in the field of petroleum, chemical industry, hyropower, ship building and machine manufacturing.
The two lower rollers are main transmission rollers and the three working rollers can aslo be main transmission roller. Two side rollers revolve the fixed centre of rotation to make the vibratory movement. There is support roller device at the two sides to ensure the rolling quality of the non symmetrical cross section profiles. The machine is with advanced construction, reliable works, small volume, complete function. It is advanced section bending equipment both home and abroad.
