Specification | Unit | HIW-60 | HIW-90 | HIW-120 | HIW-160 | HIW-200 | |
Punching pressure | Ton | 60 | 90 | 120 | 160 | 200 | |
Max.shearing thickness of steel plates | mm | 16 | 20 | 25 | 30 | 35 | |
Strength of steel plates | N/mm2 | ≤450 | ≤450 | ≤450 | ≤450 | ≤450 | |
Angle of shearing | 7° | 8° | 8° | 8° | 8° | ||
Shearing sizes of one stroke(W×H) | mm | 8×400 | 10×480 | 16×600 | 20×600 | 35×400 | |
16×250 | 20×330 | 25×330 | 30×355 | 20×700 | |||
Ram stroke | mm | 80 | 80 | 80 | 80 | 100 | |
Number of stroke | times/min | 8-22 | 8-22 | 8-22 | 8-22 | 8-22 | |
Depth of throat | mm | 300 | 355 | 400 | 600 | 550 | |
Punching thickness | mm | 16 | 20 | 25 | 28 | 30 | |
Max.diameter of punching | mm | 25 | 30 | 35 | 38 | 40 | |
Round steel | mm | 45 | 50 | 60 | 65 | 70 | |
Square steel | mm | 40×40 | 45×45 | 50×50 | 55×55 | 60×60 | |
90°Shearing of equal-angle steel | mm | 120×120×12 | 140×140×12 | 160×160×14 | 180×180×16 | 200×200×16 | |
45°Shearing of equal-angle steel | mm | 70×70×8 | 70×70×10 | 80×80×7 | 80×80×10 | 100×100×10 | |
H-beam | mm | / | 100×100 | 120×120 | 175×175 | 200×200 | |
C-Channel | mm | 126×53×5.5 | 160×60×6.5 | 200×75×9 | 280×86×11.5 | 280 | |
工-beam | mm | 126×74×5 | 160×86×6 | 200×102×9 | 280×124×10.5 | 280 | |
Main motor power | kw | 4/5.5 | 5.5/7.5 | 7.5/11 | 11/15 | 15/18.5 | |
Overall dimension(L×W×H) | mm | 1650×800×1780 | 1950×900×1930 | 2350×980×2100 | 2680×1060×2380 | 2800×1340×2030 |
Hydraulic Iron Worker
Features:
1. Manual holding system.
2. Shearing position and punching position can not working at the same time.
3. Suit for small-lot production.
Punching position Notching position Flat shearing