Operating Tips:
| Specification | Unit | SL-1600C | SL-1800C | SL-2000C | SL-2200C | SL-2500C |
| Max.swing over bed | mm | 1600 | 1800 | 2000 | 2200 | 2500 |
| Max.swing over tool post | mm | 1200 | 1400 | 1600 | 1800 | 2000 |
| Width of bed | mm | 1600 3Rail | 2050 4Rail | 2050 4Rail | 2050 4Rail | 2050 4Rail |
| Max.length of workpiece | m | 5~20 | 5~20 | 5~20 | 5~20 | 5~20 |
| Max.weight of workpiece between centers | t | 32/40/63/80 | 32/40/63/80 | 32/40/63/80 | 32/40/63/80 | 32/40/63/80 |
| Max.torque of face plate | KN.m | 90/100 | 90/100 | 90/100 | 90/100 | 90/100 |
| Total cutting capacity | kg | 8000/9000 | 8000/9000 | 8000/9000 | 8000/9000 | 8000/9000 |
| Cone point angle of center and specification | kg | 16000 | 16000/18000 | 16000/18000 | 16000/18000 | 16000/18000 |
| Section dimension of tool shank | 75° | 75° | 75° | 75° | 75° | |
| Number of spindle speeds | mm*mm | 70x70 | 70x70 | 70x70 | 70x70 | 70x70 |
| Range of spindle speed | stepless | stepless | stepless | stepless | stepless | |
| Taper bore in spindle | r/min | 0.63~125 | 0.63~125 | 0.63~125 | 0.63~125 | 0.63~125 |
| Diameter of faceplate | mm | 1:4;125/160 | 1:4;125/160 | 1:4;125/160 | 1:4;125/160 | 1:4;125/160 |
| Step No.of feed | mm | 1250 | 1400 | 1600 | 1600 | 2000 |
| Range of longitudinal feed | stepless | stepless | stepless | stepless | stepless | |
| Range of cross feed | mm/r | 1~4000 | 1~4000 | 1~4000 | 1~4000 | 1~4000 |
| Feed range of tool slide compound | mm/r | 1~2000 | 1~2000 | 1~2000 | 1~2000 | 1~2000 |
| Longitudinal rapid traverse speed | mm/min | |||||
| Cross rapid traverse speed | mm/min | 3000 | 4000 | 4000 | 4000 | 4000 |
| Max.travel of cross slide | mm | 2000 | 2000 | 2000 | 2000 | 2000 |
| Max.travel of top rest | mm | 750 | 750 | 850 | 850 | 850 |
| Diameter of tailstock sleeve | mm | 400/530/560 | 400/530/560 | 400/530/560 | 400/530/560 | 400/530/560 |
| Traversing of tailstock sleeve | mm | 300/200 | 300/200 | 300/200 | 300/200 | 300/200 |
| Spindle taper bore of tailstock | mm | 1:4;125 | 1:4;125 | 1:4;125 | 1:4;125 | 1:4;125 |
| Rapid traverse of tailstock | mm/min | 2000 | 2000 | 2000 | 2000 | 2000 |
| Rapid traverse of sleeve | mm/min | 50 | 50 | 50 | 50 | 50 |
| Power of main motor | kw | DC75/90/100 | DC75/90/100 | DC75/90/100 | DC75/90/100 | DC75/90/100 |
| Weight of the lathe with 8m | kg | 55 | 95 | 98 | 102 | 108 |
| Additional weight per 1m | kg | 2 | 2.3 | 2.3 | 2.3 | 2.3 |
| Machine overall dimension(LxWxH)(8m) | mm | 14000x3340x2280 | 14000x3800x2380 | 14000x3900x2680 | 14000x3980x2780 | 14000x4100x3050 |
